In the furniture production industry in the past decade, using different types of edge banding to seal the edges of wooden boards has been a mature process. The high standard requirements for edge banding quality, exquisite appearance, continuous improvement of edge banding technology, and gradually diversified edge banding materials all pose new requirements for edge banding adhesive.
Through continuous technological innovation, Shaosen Adhesive has developed and produced a variety of adhesive products, which are not only suitable for new edge sealing processes, but also for traditional bonding processes, making "glue-free" edge sealing a reality.
MODEL | B3030 | B3060 |
---|---|---|
Base | EVA Hot Melt Adhesive | EVA Hot Melt Adhesive |
Appearance | Light Beige ; White | Light Beige ; White |
Viscosity [mPas] / Temperature [°C] | 28000-32000/180℃ | 65000-70000/200℃ |
Softening Range (Kofler) [°C] | 75-80℃ | 95-105℃ |
Processing Temperature [°C] | 150~180℃ | 180~210℃ |
Density [g/cm³]/20°C | 1.45-1.5g/cm³ | 1.45-1.5g/cm³ |
Edge sealing pressure | 3-5kg/cm | 3-5kg/cm |
Feed rate | >4 M/MIN | 12 M/MIN |
Toxicity | No | No |
Packaging | 25kg/carton or Bagged | 25kg/carton or Bagged |
Storage | Store in a cool and dry place | Store in a cool and dry place |
Application | Suitable for small fully automatic, semi-automatic, and manual curved line edge banding machines, suitable for sealing PVC, decorative paper and other edge banding materials | Suitable for medium to large scale fully automatic linear edge banding machines, suitable for sealing PVC, decorative paper and other edge banding materials |
Note: The information on this page is based on test results from our laboratories as well as on experience gained in the field, and does in no way constitute any guarantee of properties. Due to the wide range of different applications, substrates, and processing methods beyond our control, no liability may be derived from these indications nor from the information provided by our free technical advisory service. Customer trials under everyday conditions, testing for suitability at normal processing conditions, and appropriate fit-for-purpose testing are absolutely necessary. For the specifications as well as further information, please refer to the latest technical data sheets.